No external timer required. You don't have to sit there with a
timer. No chart required for different temperatures etc.
Only makes high grade colloidal silver - because it will only accept
high grade distilled water. The unit will actually turn itself off if
the wrong water quality is used.
The MProCSG does not produce cloudy colloidal silver.
Built in water tester.
3 year warranty or more - just ask!
Built in Australia with high quality components, not mass produced
Microprocessor control for consistent production.
Withstands short mains power interruptions.
The output withstands a continuous short circuit.
In fact the unit turns itself off in that case.
Visual display of generation progression. LEDs light at each stage
of the process.
No messing around with alligator clips - this unit uses an electrode
plate with proper sockets to match the electrode plugs.
Optional sound alerts.
Supplied complete with 99.99+% 10g (2.6mm) silver electrodes, not the
thinner 12g or 14g variety.
Warranty and service backup direct from the designer & manufacturer:
Make your own Colloidal Silver (also known as Silver Water) for less than a dollar a litre, with a quality
which is as good or better than you can buy.
Colloidal Silver is pure water which has silver held in colloidal form; i.e.
ultra-microscopic silver ions in solution (ionic silver) and ultra-microscopic
particles of silver held in suspension by a positive
charge on each atom.
The new design generator has continuous
monitoring of the 'solution', shows the progress via LEDs and switches
off automatically when the desired concentration of the highest grade of
Colloidal Silver is reached - approx 5-10ppm (with optional sounds
to indicate progress and completion).
Make your own High Quality Colloidal Silver for less than a $1.00 per litre.
Internal circuitry converts the 10VAC input into approx. 30VDC, current
controlled, for use in
the production of high grade Colloidal Silver.
All operations are controlled by a microprocessor so that front panel controls
can be minimised and become multifunctional.
The unit is mains powered via a 240VAC to 10VAC plug pack (supplied).
The MProCSG unit actually tests the water to ensure that is high grade distilled
water. If the indicator does not start at the '1' progress light position (when
the electrodes are lowered into the water), the water is not of high enough
The MProCSG does not require a timer - internal or external. The unit switches off automatically when the desired concentration of
the highest grade of Colloidal Silver is reached.
The MProCSG produces 500mL of high quality Colloidal Silver per session.
The MProCSG Processor Unit measures:-
135mm (approx. 5 1/4") by 75mm (3") by 50mm (2") plus feet.
Supplied Silver Electrode description:-
99.99+% pure silver
(10gauge or larger - depends on source)
Full length - approx. 90 mm (approx. 3 1/2")
Active silver length - approx. 55mm (approx. 2 1/4")
Fitted with 4mm "banana plugs" (included in full length)
Life expectancy - approx 100 - 200 Litres of
Note: The silver electrodes are available as a separate item as well.
Custom length electrodes are also available.
The MProCSG is designed and professionally produced
in South Australia by Kestar Enterprises using high quality components and parts.
Each MProCSG system is protected by a three year warranty for faults in workmanship in
manufacturing and parts.
Warranty conditions are detailed in the handbook supplied
with the system.
Kestar Enterprises have been using the MProCSG unit to produce high grade
Colloidal Silver since September 2004.
240Volts AC mains supply (or supply your own 10V AC Plug Pack
for other mains voltages).
High Grade Distilled Water.
Email Kestar if you have any
questions via the Contact Page.
Many people have asked to be able to buy the unit without the power supply plug
pack because of the different mains power voltages throughout the world eg. USA 110V etc.
Such a unit is now available.
As well as the plug pack, the glass items have also be left out of this version.
You will be able to buy these standard items locally.